Moser engineering axles, spool, hardware

GTX JOHN · 08-21-2021, 12:18 AM

We run primarily Moser stuff in most of our dozen racers over
the years and have encountered Zero issues for 20+ years!

steven reynolds · 08-21-2021, 08:22 AM

I have Moser axles and spool in an 8 3/4 Mopar diff, been in there since '97, many passes, 4 ring and pinions, but the Moser stuff still perfect.

flash · 08-23-2021, 08:37 AM

Moser pays at div and nationals,strange only at nationals

Darrel Goheen · 08-23-2021, 11:28 PM

When I needed axles a couple of years ago I believe Strange said it was about a 6 week lead time. Moser sent the axles out the next day at a much lower cost!

Jeff Teuton · 08-25-2021, 05:51 PM

Good People. Fair prices. Couple of years ago I needed a center chunk for one of my drag packs. Got Larry Cummins to call them for me and picked it up in Indy. Just good people. Jeff

Rose Racing · 08-25-2021, 06:39 PM

Just bought a set of axles,Ring and Pinion and other goodies this past year and am very satisfied.

SGSST109E · 08-26-2021, 06:36 AM

Had a Mark Williams spool from my modified eliminator days. They cut the same MW spline on the Moser axles I bought in 1996. 35 spline both still in use today.

08-21-2021, 12:18 AM	#1
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,733 Likes: 2,802 Liked 2,486 Times in 697 Posts	Re: Moser engineering axles, spool, hardware We run primarily Moser stuff in most of our dozen racers over the years and have encountered Zero issues for 20+ years! __________________ John Irving 741 Stock 741 Super Stock

08-21-2021, 08:22 AM	#2
steven reynolds Junior Member Join Date: Jan 2009 Location: Missouri Posts: 47 Likes: 2,795 Liked 13 Times in 11 Posts	Re: Moser engineering axles, spool, hardware I have Moser axles and spool in an 8 3/4 Mopar diff, been in there since '97, many passes, 4 ring and pinions, but the Moser stuff still perfect.

08-23-2021, 08:37 AM	#3
flash Junior Member Join Date: Apr 2012 Posts: 89 Likes: 1 Liked 6 Times in 5 Posts	Re: Moser engineering axles, spool, hardware Moser pays at div and nationals,strange only at nationals

08-23-2021, 11:28 PM	#4
Darrel Goheen Member Join Date: Jan 2011 Location: Hays, KS Posts: 380 Likes: 226 Liked 70 Times in 31 Posts	Re: Moser engineering axles, spool, hardware When I needed axles a couple of years ago I believe Strange said it was about a 6 week lead time. Moser sent the axles out the next day at a much lower cost! __________________ Darrel Goheen 785-623-7021 Stock Eliminator 585 94 Camaro Z/28 LT1/ET 585 67 Chevelle 427 Tehnician for JustAnswer.com

08-25-2021, 05:51 PM	#5
Jeff Teuton VIP Member Join Date: Jan 2002 Location: Houma, LA Posts: 2,717 Likes: 2 Liked 325 Times in 50 Posts	Re: Moser engineering axles, spool, hardware Good People. Fair prices. Couple of years ago I needed a center chunk for one of my drag packs. Got Larry Cummins to call them for me and picked it up in Indy. Just good people. Jeff __________________ Jeff Teuton 4022 STK

08-25-2021, 06:39 PM	#6
Rose Racing Member Join Date: Jan 2012 Location: Sandusky, Ohio Posts: 353 Likes: 95 Liked 226 Times in 74 Posts	Re: Moser engineering axles, spool, hardware Just bought a set of axles,Ring and Pinion and other goodies this past year and am very satisfied.

08-26-2021, 06:36 AM	#7
SGSST109E Member Join Date: Jun 2007 Location: NJ Posts: 351 Likes: 62 Liked 126 Times in 61 Posts	Re: Moser engineering axles, spool, hardware Had a Mark Williams spool from my modified eliminator days. They cut the same MW spline on the Moser axles I bought in 1996. 35 spline both still in use today.