what would you guys do?

Bob Verwold · 06-17-2008, 01:56 PM

Greg,
I have a used set of 6.0 rods(H beam) and a 3.750 crank if your interested. Spun three bearings the worst rod was recon. and looks good, crank needs welded up and turned( 4340 forged) make ya a hell of a deal. Pistons are 4.145 so they won't work...............

chrismo28 · 06-17-2008, 07:40 PM

Greg,
Go for the cubes. You'll have to clearance the block with an I beam rod and a 3.750 stroke crank but thats easily done. I have what you need call me. A 3.480 stroke crank or a 3.750 stroke crank cost the same money. The pistons are a little more money but you have a connection remember?

Chris

06-17-2008, 01:56 PM	#1
Bob Verwold Senior Member Join Date: Jul 2007 Location: Fayetteville Ohio Posts: 656 Likes: 0 Liked 0 Times in 0 Posts	Re: what would you guys do? Greg, I have a used set of 6.0 rods(H beam) and a 3.750 crank if your interested. Spun three bearings the worst rod was recon. and looks good, crank needs welded up and turned( 4340 forged) make ya a hell of a deal. Pistons are 4.145 so they won't work............... Last edited by Bob Verwold; 06-17-2008 at 09:37 PM.

06-17-2008, 07:40 PM	#2
chrismo28 Junior Member Join Date: Aug 2003 Location: cincinnati,ohio Posts: 56 Likes: 0 Liked 0 Times in 0 Posts	Re: what would you guys do? Greg, Go for the cubes. You'll have to clearance the block with an I beam rod and a 3.750 stroke crank but thats easily done. I have what you need call me. A 3.480 stroke crank or a 3.750 stroke crank cost the same money. The pistons are a little more money but you have a connection remember? Chris __________________ Chris Mohring I just take cool pictures until someone lets me drive their stocker! https://www.facebook.com/stockandsuperstockdragracing