Stock lifters - Page 3

jmantle · 09-11-2019, 01:15 PM

Quote:

Originally Posted by MR DERBY CITY

I DO race in Stock,...and I don’t want them....

There are a lot of older combos out there where aftermarket roller cams / lifters are not available and wouldn't be able to take advantage of the benefits, so much for a level playing field.

Jim Mantle V/SA 6632

Billy Nees · 09-11-2019, 04:50 PM

Quote:

Originally Posted by jmantle

There are a lot of older combos out there where aftermarket roller cams / lifters are not available and wouldn't be able to take advantage of the benefits, so much for a level playing field.

Jim Mantle V/SA 6632

Hoo boy, Jim don't get me going.

09-12-2019, 12:56 PM

Quote:

Originally Posted by Terry Cain

Anyone think this will be the year when the ole flat tappet cars will get a early Christmas and roller lifters?

ohhhh NO!!

09-12-2019, 12:59 PM

Quote:

Originally Posted by Terry Cain

Tell that to the FS cars who are on the same Q sheet as the old cars. AND only 1 of those didn't make the program.

They are on the sheet and qualifying because of better parts and better technology. The lifters are a very small part of it. Keep Stock the way it is. If it came with it good, if not run what its supposed to have

Terry Cain · 09-13-2019, 11:27 AM

Quote:

Originally Posted by Todd Hoven

They are on the sheet and qualifying because of better parts and better technology. The lifters are a very small part of it. Keep Stock the way it is. If it came with it good, if not run what its supposed to have

They are on the sheet BECAUSE they are underrated BECAUSE OF the parts and technology.

Greg Hill · 09-13-2019, 11:42 AM

If you guys think roller lifters are too expensive try a billet cam with tool steel lifters with the proper coatings and break in.

Mike Savelle · 09-13-2019, 01:06 PM

Greg. how true ,we have to add 30%, thats why we run the combos with a roller cam crate motor

427FE · 11-02-2019, 10:26 AM

Quote:

Originally Posted by Greg Hill

If you guys think roller lifters are too expensive try a billet cam with tool steel lifters with the proper coatings and break in.

Is this absolutely necessary? Whats the next step down from this?

littlemanjoe · 11-02-2019, 12:07 PM

Quote:

Originally Posted by Greg Hill

If you guys think roller lifters are too expensive try a billet cam with tool steel lifters with the proper coatings and break in.

Greg, do you see any gain going this why?
I'm looking at switching mine over now.

09-13-2019, 11:42 AM	#26
Greg Hill VIP Member Join Date: May 2006 Location: Louisville , KY Posts: 1,995 Likes: 68 Liked 279 Times in 68 Posts	Re: Stock lifters If you guys think roller lifters are too expensive try a billet cam with tool steel lifters with the proper coatings and break in. __________________ Greg Hill 4171 STK

09-13-2019, 01:06 PM	#27
Mike Savelle Member Join Date: Dec 2001 Location: Ontario Canada Posts: 369 Likes: 125 Liked 7 Times in 5 Posts	Re: Stock lifters Greg. how true ,we have to add 30%, thats why we run the combos with a roller cam crate motor