Mr 5 & 50 68 Cuda

TOM KASCH · 01-20-2012, 11:10 PM

Just sold on Barret-Jackson for $220,000 !

Doug Blackley · 01-20-2012, 11:13 PM

The T-bolt ahead of it was pretty cool with the Mickey Thompson hemi heads was pretty cool too. Though it would've been nice to have seen more of the Hemi Dart after.

Hemi Moose · 01-20-2012, 11:40 PM

Prices on these factory hot rods are starting to creep back up again...I hope you bought something you liked when the prices were low for the past several years.

Travis Miller · 01-20-2012, 11:40 PM

The MT Thunderbolt also brought $220K.

The discussion about Mickey making Hemi heads fit on the Ford and Pontiac can be addressed this way. The 392 Hemi, the FE Ford and the Pontiac all have the same bore spacing. They also have the same head-bolt arangement using ten bolts. It was actually a fairly easy deal mounting the 392 Hemi heads on the Ford and Pontiac engines.

Travis Miller

(Disclaimer: Opinions expressed by me on this forum are exactly that, my opinions.)

bigshow2966 · 01-20-2012, 11:59 PM

Is there any proof they weren't bought back by the owners?

The Cirque' De Sand is a poor tool to use to judge real car prices.

treessavoy · 01-21-2012, 02:18 AM

As usual, since chevy is a major sponsor, them go to commercial break every time a Mopar comes to the block.

But, some things I noticed about the 5 and 50 car: Chrome bumpers, I thought they were fiberglass; rear panel showed dual exhaust cutouts....?; and front fenders had side warning lights on them......on fiberglass....? Highly suspect to me.

JimR

hookdaddy · 01-21-2012, 08:40 AM

Here's a like to a photo "back in the day" Chrome bumpers & marker lights - just sayin' http://www.prostockhemi.com/gallery2...g2_itemId=2007

Nitro Joe Jackson · 01-21-2012, 09:43 AM

i dont watch the show anymore after learning from a real good sourse that most of the totals are ran way up for tv. This show has hurt the chances of any level head pricing of muscle cars

Dan Bernay · 01-21-2012, 10:45 AM

That BJ bigwig with the sunglasses needs a beatdown AND needs to SHUT UP!
I mute evertime he is on camera!

Paul Merolla · 01-21-2012, 11:11 AM

Quote:

Originally Posted by treessavoy

As usual, since chevy is a major sponsor, them go to commercial break every time a Mopar comes to the block.

JimR

Seriously? It must suck to go through life with that giant Mopar Chip on your shoulder.

01-20-2012, 11:10 PM	#1
TOM KASCH VIP Member Join Date: Apr 2004 Location: TOLEDO,OHIO Posts: 1,735 Likes: 0 Liked 241 Times in 100 Posts	Mr 5 & 50 68 Cuda Just sold on Barret-Jackson for $220,000 !

01-20-2012, 11:13 PM	#2
Doug Blackley Member Join Date: Dec 2001 Location: Hanover, MA Posts: 430 Likes: 3 Liked 1 Time in 1 Post	Re: Mr 5 & 50 68 Cuda The T-bolt ahead of it was pretty cool with the Mickey Thompson hemi heads was pretty cool too. Though it would've been nice to have seen more of the Hemi Dart after. __________________ Doug Blackley 1697 STK

01-20-2012, 11:40 PM	#3
Hemi Moose VIP Member Join Date: Jan 2010 Posts: 2,824 Likes: 0 Liked 12 Times in 12 Posts	Re: Mr 5 & 50 68 Cuda Prices on these factory hot rods are starting to creep back up again...I hope you bought something you liked when the prices were low for the past several years.

01-20-2012, 11:40 PM	#4
Travis Miller Member Join Date: Jun 2007 Posts: 478 Likes: 1 Liked 276 Times in 27 Posts	Re: Mr 5 & 50 68 Cuda The MT Thunderbolt also brought $220K. The discussion about Mickey making Hemi heads fit on the Ford and Pontiac can be addressed this way. The 392 Hemi, the FE Ford and the Pontiac all have the same bore spacing. They also have the same head-bolt arangement using ten bolts. It was actually a fairly easy deal mounting the 392 Hemi heads on the Ford and Pontiac engines. Travis Miller (Disclaimer: Opinions expressed by me on this forum are exactly that, my opinions.)

01-20-2012, 11:59 PM	#5
bigshow2966 Senior Member Join Date: Mar 2007 Location: chicago Posts: 650 Likes: 647 Liked 124 Times in 52 Posts	Re: Mr 5 & 50 68 Cuda Is there any proof they weren't bought back by the owners? The Cirque' De Sand is a poor tool to use to judge real car prices.

01-21-2012, 02:18 AM	#6
treessavoy VIP Member Join Date: Feb 2009 Location: Dunnellon,FL Posts: 1,103 Likes: 0 Liked 4 Times in 4 Posts	Re: Mr 5 & 50 68 Cuda As usual, since chevy is a major sponsor, them go to commercial break every time a Mopar comes to the block. But, some things I noticed about the 5 and 50 car: Chrome bumpers, I thought they were fiberglass; rear panel showed dual exhaust cutouts....?; and front fenders had side warning lights on them......on fiberglass....? Highly suspect to me. JimR __________________ Jim Rountree

01-21-2012, 08:40 AM	#7
hookdaddy Member Join Date: Jun 2007 Location: Ocala Florida Posts: 254 Likes: 0 Liked 8 Times in 3 Posts	Re: Mr 5 & 50 68 Cuda Here's a like to a photo "back in the day" Chrome bumpers & marker lights - just sayin' http://www.prostockhemi.com/gallery2...g2_itemId=2007 __________________ Don Scholl d.scholl@comcast.net 145Y Stock - 145H Super Comp

01-21-2012, 09:43 AM	#8
Nitro Joe Jackson VIP Member Join Date: Dec 2001 Location: Loudonville, Ohio or where ever the Nitro Lounge is parked Posts: 2,293 Likes: 53 Liked 67 Times in 19 Posts	Re: Mr 5 & 50 68 Cuda i dont watch the show anymore after learning from a real good sourse that most of the totals are ran way up for tv. This show has hurt the chances of any level head pricing of muscle cars __________________ Nitro Joe Jackson STK 3431 nitrojoe@neo.rr.com

01-21-2012, 10:45 AM	#9
Dan Bernay Member Join Date: Jan 2010 Location: Connecticut Posts: 391 Likes: 2 Liked 13 Times in 8 Posts	Re: Mr 5 & 50 68 Cuda That BJ bigwig with the sunglasses needs a beatdown AND needs to SHUT UP! I mute evertime he is on camera!