07-19-2013, 12:58 PM
|
#1
|
VIP Member
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 4,296
Likes: 2,383
Liked 3,181 Times in 972 Posts
|
Re: Low travel hydraulic stocker lifters
Quote:
Originally Posted by Mike Taylor 3601
G Anderson,
That is the same method I use.
I say if you tighten your lash to .003 or .005 you'll see and improvement.
I use the in closing/ex opening (honda method)in case need explanation,intake is almost closed set the ex ex barely opens set the intake if engine is warm usaully start with setting ex valves,if you go through all ex or all in engine does'nt have to rotate alot if rotating by hand just make sure you rotate engine the direction it runs.
Mike Taylor 3601
|
Bingo!
__________________
Jim Carter
2340 Super Stock
2340 SST/2340 Stock
Set another place at the table
|
|
|