oil retention devices

[63corvette]

Originally Posted by art leong

Your marbles, sand and water makes sense.
But you can not put 32 onces of a liquid in a 16 ounce container.

I hope everyone understands that Art, the story was just to inject some fun in the thread about diapers. They will hold a lot of liquid as I witnessed.
Like I said I ran one in S/G before they were required in I believe 2007 or 2008 in S/G.
I bought mine from Summit in 2006 and not many made custom fit diapers at that time. Mine fits OK but I have a all tube frame car with lots of room as most S/G cars do. The story was about a all tube frame car and an off the shelf diaper.
My diaper is built like a box without a top of material. I had to sew it up in the back to keep it out of the flywheel.
It is flat on the bottom all the way to the front balancer so it does not actually fit like a glove around the pan sump or block. There is lots of room to hold parts and liquid and I would think after seeing close to 10 not exactly 10 gallons poured into the radiator and I am sure some of it was in the radiator and some in the block also they will hold a lot of liquid.
My point was they do not leak and it was very funny to all of us after it was figured out. Like I said you needed to be there.
I was just trying to add a little comedy to the thread where everyone was just bashing the diaper. That was the point with the shorts in a wad.
A diaper is a safety item to me. My car runs 160+ MPH and I do not have a death wish so I ran one before they were required for S/G for safety just in case.
If everyone is so serious on the threads I will keep the funny stories for the racers at the track as most of the people I see there have a sense of humor especially in the evenings when bench racing.
Just My 2 Cents
Rick Cates